Making A Simple Hanging Jewelry Organizer

Having a hanging jewelry organizer is one of the best things that you can do to diminish clutter from your jewelry collection. Not only are they easy to make they are inexpensive to make as well. Today we will be learning to make one of these great space saving devices. There is couple of materials that we need to gather up before we can begin on the construction of our hanging jewelry organizers. There are a few things that we need to collect before we can start to make the hanging jewelry organizer. The materials that we need are a piece of plastic or cloth sheet such as a tarp or bed sheet. A sharp pair of scissors, measuring tape, stick of super glue, sewing machine or needle and thread and or a hot glue gun, a coat hanger, and a pencil marker or piece of chalk. Once we have collected all of our materials it is time to begin construction of the hanging jewelry organizer. The first step that we need to take is to cut the material for the pockets. The easiest way to do this is to cut ten pieces of material the width of the large piece of material, and the length of about four or five inches. After the strips have been cut it is now time to sew them to the large piece of material. The easiest way that I have found to do this is to glue the four corners of the strip to the large piece of material. The way that I personally use is to line up the bottom of the strip with the bottom of the large piece. By doing this I get a level line of pockets. After doing this simply sew the bottom and the sides of the strip to the large piece. Once you have sewn the bottom and side portions of the strip it is now time to sew the center portions that will make up the dividers for the pockets. This portion of the project is all going to be based on personal preference and individual needs. I usually try to fit many different size pockets into the hanging jewelry organizer. The final step is where we add the hanging part to hanging jewelry organizer. This is where we add the coat hanger to the main piece of material. At this point every one of the strips should be sewn into the large material and made into pockets. Once this is done cut a small piece of material and cut a hole just large enough for the hook part of the coat hanger to fit through. Once this is done hem the material around the hole as to provide tear support for the hanger when it holds the organizer. For more information about building a Hanging Jewelry Organizer and Wall Hanging Jewelry Organizers